Spyderco Manix 2 - CPM S110V - Review

April 29, 2017

The Spyderco Manix 2 is a robust, highly ergonomic EDC knife designed by Eric Glesser. It is made in Golden, Colorado and is available in a range of steel, handle, and lock variants. This specific variant is the G-10 model in CPM S110V steel. CPM S110V is a highly corrosion resistant and wear resistant steel produced by Crucible in the U.S. Spyderco’s standard production S110V knives come with dark blue handle scales, which brings some additional variety to the company’s U.S. made product line.

This Manix 2 uses Spyderco’s own caged ball bearing lock. The lock is made up of a few components. The steel ball bearing sits in a cage, which provides traction to unlock it. The cage also enables it to be pushed forward by a small coil spring to lock the blade open. As the knife opens, the ball rolls along the tang of the blade and is pushed into a shelf formed by the blade and the steel backspacer. The result is a smooth action and a sturdy lock up. Releasing the lock can be accomplished with one or two hands and is best accomplished by gripping the cage on both sides.

Once the lock is released, a small flick of the wrist easily swings the blade shut. This also keeps the hand safely away from the path of the edge. The lock also provides a strong, crisp detent that keeps the blade stored in the handle. Our Manix 2 locks up perfectly and while the spring was stiff out of the box, it has broken in nicely without the need for any adjustments. Those with smaller hands might have to revert to closing this knife with two hands as the size can make one handed closing a challenge in some cases.

The 3.37" (86 mm) blade of the Manix 2 is leaf shaped and tapers to a fine point. It arrived sharp out of the box and the shape performs well in a range of EDC tasks. It easily pierces thick tape, cardboard, and other materials. The full flat grind takes the 3.2mm thick blade stock down to a fine edge for slicing. The blade features only a few markings. On the front side is Spyderco’s bug, the company’s name, and the steel type. The back of the blade features Eric Glesser’s maker’s mark and the place of origin, which in this case is Golden, Colorado. CPM S110V is known for its wear and corrosion resistance and it is living up to those expectations so far. We will update this review with our thoughts as we continue to test CPM S110V.

Jimping is present both on the spine and the finger choil providing sufficient traction and control. It is aggressive enough to prevent slipping without excessively wearing on the hand. Slightly softer and rounded jimping is present on the steel liners next to the backspacer as well as on the bottom, rear portion of the handle. This lends some visual appeal and a bit more traction. Some may find this excessive, but we never found it to be uncomfortable in our testing.

The G-10 used seems to be the standard texture found on many of Spyderco’s other U.S. knives. It prevents slipping even with sweaty hands and the dark blue color looks great. The edges of the handle subtly glow in the light, which further enhances the look. Unlike the other standard G-10 versions of the Manix 2, the S110V variant features skeletonized liners, which help to reduce the weight while retaining strength. It is a wide knife and it carries fairly large, but it is well suited for anyone looking for a knife that looks and feels solid.

The clip is a standard Spyderco hourglass design with a polished finish. It is certainly not as low profile as some of the company’s wire clips, but the design easily accommodates a range of pocket materials without concern of stressing it. It can be set for either left or right side, tip up carry as the cage of the ball bearing lock would interfere with a tip down position. Its positioned right at the rear tip of the handle which helps to sink the knife down into the pocket. This leaves only a small portion of the knife sticking above the pocket, which we find to be acceptable as it makes it easy to retrieve the knife from the pocket without being excessive.

Overall, we continue to enjoy using the Manix 2 and it has earned a place as one of our EDC favorites. With that said, the size/weight and the color of the scales on this variant might not appeal to everyone. Those looking for something compact and lightweight may not end up liking this particular model. However, we tend to prefer the robust build style of this knife and find that the dark blue G-10 offers something a bit different from the usual black.

Spyderco Manix 2 Folding Knife, 3.37", Dark Blue Buy on Amazon

FIT4Recreation^TM is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

To help support our site and continue to provide new content in the future, these links provide us with a small commission for each sale.

Spyderco Techno – First Impressions

March 12, 2017

The Spyderco Techno is a small, titanium frame lock folding knife with a 2.55″ (65 mm) blade made out of CTS-XHP. Designed in collaboration with Polish knifemaker Marcin Slysz, the Techno offers a compact and dense build that excels in certain areas and falls behind in others.

One of the first things that is noticed when handling the Techno is that it is stout. While it is generally a small knife, it is a hearty 3.6 oz. Compare this with something like the similarly sized Spyderco Dragonfly 2, which is only 1.2 oz. Although, it should be noted that these knives are clearly built in very different ways. The Dragonfly 2 is a lightweight slicer, while this is an overbuilt, small folder with a 4.5mm thick blade. In general, this works to the Techno’s benefit as it provides a definite sense of its high-quality build, which accompanies its equally sizable price. The MSRP is $329, but it can be found at various knife dealers for around ‎$197.97.

Like each of the Slysz collaborations with Spyderco, the Techno comes out of the box at a top-notch level of fit and finish for a production knife. The titanium scales have a nice stonewash texture, which provides some detail that varies in the light and manages wear quite well. In addition, the titanium offers a decent level of grip for a smooth surface, which when combined with the overall design lends to a generally comfortable knife to hold.

One of the neat things about the Techno is the way it manages to merge round and angular design while still maintaining comfort. The edges of the handle are nicely chamfered which reduces hotspots and generally adds some additional detail. Little details like that reflect care in the design and the excellent execution of them in a production knife is great to see.

One of the more polarizing aspects of the Techno is the inclusion of the blue G-10 backspacer that partially fills the back of the knife. While it may not be for everyone, we feel that the blue complements the gray titanium and steel nicely. The texturing also fits into the palm nicely without being too aggressive.

Also present on the handle is Spyderco’s wire clip. The clip is finished to match the handle scales and is fairly low profile. Retention seems to be a weak point though as the combination of the clip’s finish with the titanium makes it slide easily. While it is easy to retrieve and lessens wear on the pocket, it can be a bit concerning particularly if the clip were to get caught on something.

Like the handle scales, the blade of the Techno is also nicely stonewashed, but this time with an almost mirror-like appearance. This treatment blends with the handle quite well and keeps visible wear minimal. It also softens the spine, jimping, and edges of the hole on the blade. The result is a blade with a sharp edge only where it matters and feels good to the hand. Although, it should be said that the traction provided by the softened jimping does not rival sharper patterns like those found on the Para Military 2, Manix 2, or Dragonfly 2. However, given the role of this knife and the value of bringing something different to the table, we see this as a strength rather than a weakness.

Blade Length - 2.55″ (65 mm)

Overall Length - 5.98″ (152 mm)

Blade Thickness - .177″ (4.5 mm)

Weight - 3.6 oz (102 g)

As our time with the Techno continues, our impressions will evolve into a full review and we will update this article with both positive and negative points as we encounter them. For now though, the Spyderco Techno brings excellent build quality and a beautiful design to the company’s little big knife line.

Spyderco Techno Titanium Plain Edge Knife Buy on Amazon

To help support our site and continue to provide new content in the future, these links provide us with a small commission for each sale.

Spyderco Mantra 1 - Review

March 12, 2017

The Spyderco Mantra 1 is a titanium frame lock flipper designed by Eric Glesser. This variant retains a full size round hole on the blade and weighs 3.0 oz. The knife’s blade is 3.2 inches long and 3 mm wide at the spine. It is made of Crucible’s CPM M4 high speed tool steel, which has excellent edge retention. That steel is not considered a stainless steel, which means that it requires more effort to prevent corrosion and can also develop a patina over time.

The handle of the Mantra is made out of titanium with a stonewashed finish. Like the Spyderco Techno, this finish keeps visible wear minimal and looks great. The titanium provides a surprising amount of traction for a smooth surface. The overall shape of the handle is reminiscent of the Delica and that definitely is a positive thing. It is very comfortable and the flipper tab acts to prevent the hand from slipping up towards the edge. The only hotspots present are very minor and are the touch of jimping on the lock bar and the wire clip. In normal use, they do not pose any problem at all, but in extended use they could start to wear on the hand.

Spyderco Mantra (Left) & Spyderco Techno (Right)

Unlike the Techno, the wire clip seems to excel here on the Mantra. Retention is excellent and the knife carries deep in the pocket. Despite the polished appearance, the wire clip tends to draw less attention than a standard hourglass clip like the one found on a Para Military 2. In addition, the Mantra is easily retrieved and put away, while also keeping wear on the pocket to the minimum. The clip can be moved to either the left or right side, but only in a tip up configuration.

The key feature of the Mantra is that it is a flipper. The pivot runs on bearings and the action is quite smooth. It does take some practice, but the flipper tab works well and the knife can be flipped open without a flick of the wrist. It should be noted that the tab responds better to a push like a button rather than being flicked like a switch. The detent keeps the blade shut when not in use and provides sufficient resistance for flipping. Spyderco’s round hole also works well, which enables a range of deployment options. The frame lock present on the Mantra features a steel interface which also functions as an over-travel stop. Out of the box, there was a hint of lock stick, but that went away after about a week of occasional use and has not returned. Lock up is solid with no perceivable blade play in any direction.

The blade features a satin finish with the beautiful, deeply engraved bug logo found on many of the models that come out of Taichung. The knife arrived quite sharp out of the box and we will update this article when we have to sharpen it. Its full flat grind paired with the 3mm stock makes it an excellent slicer. The M4 steel on our knife has remained in great shape since July 2016 with limited maintenance. Occasionally coating the blade with oil, adding some to the pivot, and limiting prolonged exposure to moisture has been sufficient. However, it will rust easier than stainless steels if mistreated and its particularly important to avoid getting any corrosive or sticky substances into the pivot area due to its usage of bearings.

Blade Length - 3.20" (81 mm)

Overall Length - 7.34" (186 mm)

Blade Thickness - 0.118" (3.0 mm)

Weight - 3.0 oz (85 g)

In general, the Mantra is an impressive knife. The Taichung factory again delivered an item with perfect fit and finish for a production knife and it definitely performs well. If you are looking for a well-made Spyderco flipper and don’t mind caring for its steel, the Mantra might be what you are looking for.

spyderco Mantra Titanium Plain Edge Knife Buy on Amazon

To help support our site and continue to provide new content in the future, these links provide us with a small commission for each sale.

Spyderco Ladybug 3 Hawkbill Salt – First Impressions

March 10, 2017

Spyderco has a reputation for providing a range of knives of all different shapes and sizes. In fact, one of their preferred terms is the “little big knife”, one that is physically small but handles and cuts like one that is much larger. This brings us to one of the smallest of the locking knives offered by the Golden, Colorado company. The Ladybug 3 comes in a variety of different configurations. The standard blade shape is offered in both plain and serrated edge models with VG-10 or H-1 steel. This particular model is the non-sprint Hawkbill Salt variation which is currently only available in serrated H-1 Steel with Yellow FRN handle scales.

As expected, the Hawkbill Ladybug came out of the box with a sharp factory edge. One of the things that surprised us the most was the ease in which it can be opened and closed with one hand. Even at this scale, Spyderco’s trademark round hole works well. Going further, the knife’s overall design provides for a secure grip. The thumb rests naturally and securely on the thumb ramp which is covered in jimping that provides sufficient traction without creating a hotspot. Three fingers then fall naturally into the indentations on the handle. The result is a surprisingly secure grip on a very small knife which can be further augmented via a lanyard.

Initial impressions of the blade shape and serrations are positive. The blade can easily pierce and cut through materials like tape, cardboard, and thicker plastic/paper materials like those used in dogfood bags and other heavy packaging. The serrations are sharp enough to push cut through paper but also offer extra aggressiveness when cutting through material like paracord and rope. As we continue our testing, we will expand upon any additional strengths and weaknesses discovered. In general, we are impressed with the cutting power provided by the Hawkbill given that its 1.875 inch (48 mm) blade length might seem so small that it would lack usefulness. After all, the blade is not all that much longer than the one found on a Victorinox Classic SD. However, the combination of the blade shape, robust lock, and ergonomic handle make all of the difference.

Spyderco’s FRN continues to provide a quality feel with great traction which benefits a knife as small as this one. While the ultra-light weight of only 0.6 oz. (18 g) might feel cheap to some, we feel that the overall build conveys a sense of quality that makes it worth the price. We have not noticed any major flexing, rattling, gaps, or any other element that would indicate a cheap or poor build. In addition, we like how FRN holds up to wear as it does not seem to scratch easily or lose traction significantly over time.

Lockup is as solid as can be reasonably expected on a knife of this size. Should tuning or deep cleaning be necessary, the pivot and lockbar can be adjusted via small torx (T5) screws. Although, those who seek to disassemble this knife should be aware that it would likely void the knife’s warranty.

Of course, no examination of a knife would be complete without a brief discussion of its steel. This is especially the case with many of the knives in Spyderco’s Salt line which use H-1 steel. In many ways, H-1 is an interesting metal. It uses nitrogen to mostly replace the carbon present in many steels. This change provides it with extreme corrosion resistance that makes it well suited for any use case that exposes it to moisture or salt. H-1 is also interesting for its work hardening qualities which means that grinding, rolling, and other work done over the course of production increases the hardness of the metal. This is a reason why Spyderco and others familiar with Salt knives believe that the serrated H-1 models hold their edge longer than plain edge variants. The increased work done to serrated blades seems to result in a much harder edge. Another potential strength of H-1 is its response to use. While it may be a softer steel that may need to be sharpened more often, it tends to roll and bend as opposed to chip or break. This might make general maintenance easier over time and may make it easier to recover from mishaps or damage from hard use.

Blade Length - 1.875 ” (48 mm)

Overall Length - 4.313 ” (110 mm)

Blade Thickness - .078 ” (2 mm)

Weight - 0.6 oz. (18 g)

Overall, we are impressed with the Ladybug 3 Hawkbill Salt. It fills a role as a compact, ultralight knife with major cutting performance. As such, we look forward to preparing a full review as we complete our thoughts and observations on this model. In general, we feel that this is an excellent companion knife especially to a larger, plain edge blade knife like a Manix 2 or a Para Military 2.

Spyderco Ladybug3 FRN H-1 Hawkbill, Yellow Buy on Amazon

To help support our site and continue to provide new content in the future, these links provide us with a small commission for each sale.